Model

LNXY

LNDY

DBX1

DBX2

MBX1

MBXC

DBXU

MBXU

Working Volumes

10 to 50 liters Laboratory/pilot scale

50 to 200 liters Laboratory/pilot scale

300 to 10,000 liters Commercial scale

600 to 6,000 liters Commercial scale

600 to 10,000 liters Commercial scale

3,500 to 20,000 liters Commercial scale

300 to 10,000 liters Commercial scale

1,500 to 15,000 liters Commercial scale

Standard Features

·Flat top cover

·Common screw and arm drive

·Fractional power rating

·Free-hanging cantilever-design screw shaft

·Common screw and arm drive

·Screw shaft being non bottom-supported. 

·Screw shaft has no bottom support.

·Reinforced swing arm  and mixing screw have individual drive motors

·Directly-coupled drive unit

·Cantilever-design screw shaft

·Without bottom support

·Additional screw

·Arm and screw driven by separate motors

·Bottom discharge

·Bottom-supported screw shaft

·Swing arm and mixing screw have separate drive motors

·Arm drive has safety coupling and limit switch.

·Bottom bearing support dependent on mixer capacity and product characteristics

·  Flat top cover

·  Two standard conical shells welded to form a single one

·  Bottom supported mixing screws

·  Side outlet

·Free-hanging screw shaft

·Vacuum/pressure operated shell jacketed

·Dished top

·Dry mechanical seals for the rotary joints of swing arm and screw

·Variable frequency drive for the screw to vary shaft speed as required

·Bottom-supported screw shaft

·Vacuum/pressure operated shell jacketed

·Dished top

·Dry mechanical seals for the rotary joints of swing arm and screw

·Variable frequency drive for the screw to vary shaft speed as required

Optional Features

·Heating/cooling jacket

·Dished top

·Heating/cooling jacket

·Optional vessel design to withstand operating condition of both pressure and vacuum

·Support accessories can be provided to make it a unit

·Dished top

·Heating/cooling jacket

·Compatible for pressurized applications

·Liquid spraying attachment

·Lump breaker

· Dished top

·Heating/cooling jacket

·Liquid spraying attachment

·Lump breaker

·Dished top

·Heating/cooling jacket

·Liquid spraying attachment

·Lump breaker

·Optional design for mixing-heating in pressurized condition

·Dished top

·Heating/cooling jacket

·Liquid spraying attachment

·Lump breaker

·Lump breaker

·Dust collector/filter for vacuum operation

·Surface condenser

·Surface scraper for screw flights

·Jacket-- spirally baffled conventional or half-pipe limpet coil

·Lump breaker

·Dust collector/filter for vacuum operation

·Surface condenser

·Surface scraper for screw flights

Application Highlights

Preparation of pharmaceutical and non-pharmaceutical products

Drying, reaction, or preparation of of pharmaceutical and non-pharmaceutical products

Mixing of abrasive, fragile, and heat-sensitive products and materials of varying density

Examples:

·Vitamin concentrates

·Heat stabilizer and lubricants

·Resins and additives

·Water treatment chemicals,

·Heavy metal powders

·Dairy mix and milk powder

Faster mixing of pharmaceutical and non-pharmaceutical products including specialty chemicals

Mixing or mixing-heating

Examples:

·Powder and paste

·Cat gum

·Granule and slurry

·Blending of polymers

·Guar gum powders

·Catalysts and additives

·Dyestuff powders

Double-cone mixer ideally suited for installation sites with restricted head room

Required mixing time substantially reduced compared to equal volume single unit

Mixing and mixing-cum-heating of pharmaceutical and non-pharmaceutical powder ingredients with additives, blending of dyestuff

Drying of heat sensitive API wet mass and similar products, pharmaceutical and non-pharmaceutical materials at reduced temperature

For reaction, solvent extraction, and similar unit operations

Drying of heat sensitive pharmaceutical and non-pharmaceutical products

Preparation of tooth paste

Impregnating clay granules with pesticides

Making detergents, Drying rubber chemicals

JoomShaper